Posted on Leave a comment

Claymore’s Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)

Latest version is v9.4:

  • added alternative Sia Stratum support (Siamining, Nicehash). Stratum version detection is automatic.
  • improved fans management for latest drivers and Polaris cards.
  • added “-mpsw” option.
  • added shares-per-GPU statistics when “s” key is pressed.
  • Included EthMan v3.0 which supports passwords and email notifications.

LINKS:

GOOGLE: https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU  NOTE: It seems Google blocks some files, use MEGA if you cannot find latest version.
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w

Posted on Leave a comment
Posted on Leave a comment

Claymore’s Dual Ethereum AMD+NVIDIA GPU Miner v9.3 (Windows/Linux)

Latest version is v9.3:

  • improved dual mining speed stability in ASM mode.
  • added “-altnum” option for alternative GPU indexing.
  • a few minor bug fixes and improvements.

Links:

GOOGLE: https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU  NOTE: It seems Google blocks some files, use MEGA if you cannot find latest version.
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w

Source:

Bitcointalk

Posted on Leave a comment
Posted on Leave a comment

Claymore’s Dual Ethereum GPU Miner v9.2

Latest version is v9.2:

  • improved mining speed stability.
  • added changes in DCR mining protocol.
  • fixed possible issue with rejected DCR shares on Nicehash pool.
  • added pool selection in runtime (“e” and “d” keys).
  • now if devfee mining fails for a long time, miner will not stop mining, it will turn on “-nofee” option temporarily with appropriate warnings, until successful devfee mining.
  • some minor improvements.
  • EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check “sample.bat” for details.

Continue reading Claymore’s Dual Ethereum GPU Miner v9.2

Posted on Leave a comment
Posted on Leave a comment

Claymore’s Dual Ethereum GPU Miner v9.0

Version 9.0 has been released!

Changelog:

  • added “-asm” option (AMD cards only) which enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use “-dcri” option or or “+/-” keys in runtime to set best speed.

    Currently only ETH-only and ETH-DCR modes are supported in assembler. Use “-asm 0” if you don’t want to use new assembler kernels.

    If ASM mode is enabled, miner must show “GPU #x: algorithm ASM” at startup.

  • improved ETH mining speed in ASM mode for some cards, also a bit reduced power usage for some cards (fine-tuning is required via “-dcri” or “+/-” keys in runtime).

    NOTE 1: if GPU throttles, best “-dcri” value is different.

    NOTE 2: speed peak can be rather short, so change “-dcri” value slowly.

  • dramatically increased DCR mining speed in assembler mode (up to 70%). Be careful, power usage is higher too.
  • added “-gmap” option.
  • fixed DCR Nicehash support.
  • added “FINE-TUNING” section to Readme file.
  • A lot of minor improvements and bug fixes.

Continue reading Claymore’s Dual Ethereum GPU Miner v9.0

Posted on Leave a comment
Posted on Leave a comment

Claymore Ethereum Dual Miner 8.0

It has been a while since we’ve seen a new version of the Ethereum miner from Claymore – but it’s finally here!

Latest version v8.0:

– added new coin for dual mode: PASCAL(PASC). Now you can mine Ethereum, Ethereum+Decred, Ethereum+Siacoin, Ethereum+Lbry or Ethereum+Pascal. NOTE: Currently Pascal is not available for NVidia cards.
– added “-nofee” option.
– added ability to use environment variables in “epools.txt”, “dpools.txt” and “config.txt” files. For example, define “WORKER” environment variable and use it as “%WORKER%” in config.txt.
– added “License.txt” file.
– some minor improvements.

Continue reading Claymore Ethereum Dual Miner 8.0

Posted on Leave a comment
Posted on Leave a comment

Claymore ZCash GPU Miner 12.1

Bug fix for previous version of 12.0:

  • slightly improved stability. If it is still unstable for you, reduce “-i” value.
  • fixed issue with wrong hashrate when “-li” or “-ttli” options enabled.

Continue reading Claymore ZCash GPU Miner 12.1

Posted on Leave a comment
Posted on Leave a comment

Claymore ZCash / ZEC miner 11.1 released

Another update brings the version up to 11.1:

  • improved speed, about 365H/s on stock 390X, 385H/s on stock Nano, 260H/s on stock 280X, 260H/s on stock RX480.
  • improved compatibility.
  • some bug fixes and minor improvements.

Continue reading Claymore ZCash / ZEC miner 11.1 released

Posted on Leave a comment
Posted on Leave a comment

Claymore Zcash / ZEC miner 11.0 released

That was fast! Version 11 has been released, hot on the heels of v10. Improvements include:

  • improved speed for Hawaii, Fury, Tahiti and Pitcairn cards. About 355H/s on stock 390X, 370H/s on stock Nano, 250H/s on stock 280X.
  • added faster assembler implementation kernels for these cards.
  • added “-asm” option.

NOTE: assembler implementation has best speed but bad compatibility. If it fails for you, make sure you use 15.12 drivers, or use “-asm 0” option.

Continue reading Claymore Zcash / ZEC miner 11.0 released
Posted on Leave a comment
Posted on Leave a comment

Claymore Zcash / ZEC miner 10.0 released

Latest version v10.0:

Posted on Leave a comment